Applied Safety Engineering Assignment Example | Topics and Well Written Essays - 500 words

Applied Safety Engineering - Assignment Examplea) Each employee essential be provided fall protective cover by the employer on a hold that is greater than 10 feet elevated railroad from the lower level. A qualified various(prenominal) has to determine the possibility and safety giving fall protection for the civiliseforce that is erecting or taking to pieces the standed scaffold.b) The toprail must be in between 38 and 45 inches (0.9- 1.2 meters). Midrail should be close enough to the halfway point between toprail and platform surface. Whenever a crosspoint of crossbracing is utilised as midrail, it has to be region of 20-30 inches (0.5-0.8 meters) on top of the work platform.d) Scaffold and its components should at least harbour a load that is 4 times the load that it was actually designed for. Suspension rigging of the scaffold should be at minimum 6 times the designed load.e) Prior to each and every work shift and following any situation that has the ability of compromisin g the structural integrity, a qualified individual has to examine the scaffold and the elements of the scaffold so as to check for any noticeable defects.h) An engineer is requisite to design scaffold that are not stationary at the time the workforce is working on them and the design of brackets on frames that are fabricated on the scaffold to be used to give support to the cantilever loads plus the workers.i) Access must be provided whenever the platform is greater than 2 feet to a higher place or lower than the point of access. Access that is direct is allowed in a situation that the scaffold is less(prenominal) than 14 inches horizontally and lesser than 24